Rainwater tank size & roof runoff calculator
RAINWATER TANK SIZE CALCULATOR
How much rainwater
could you live on?
Put your roof to work. Find out what you could collect, how much to store, and when you might run short.
YOUR RAINWATER POTENTIAL
London, United Kingdom
YOUR TANK STARTING POINT
—
THE TANK YOU’RE COMPARING
5,000 L tank
¹ Uses your highest daily demand month. Assumes a full tank at the start and the unavailable volume above.
Bridge a dry spell
Make your water last
SIZE VS COVERAGE
What does a bigger tank buy you?
Coverage is the share of historical days with water use where the full demand was supplied. Zero-use days are excluded. Tank options are generic sizes, not a product catalogue.
PLAN AHEAD
Your year in rainwater
See when your roof earns its keep, and when to watch the tank.
Free personalised plan · email required
Months to watch
Your seasonal shortfall pattern will appear here.
Collection, use & backup L / month
Swipe the table to see shortfall days, risk and dry-spell storage →
| Month | Usable rain mm |
Collect L |
Use L |
Backup L |
Shortfall days / month |
Days with shortfall % of days with use |
Tank for dry spell² L |
|---|
Usable rain excludes precipitation on days at or below 0°C (32°F) and includes local rainfall and drier adjustments. Collection = usable rain × connected roof × efficiency.
Monthly averages across 1996–2025. Shortfall risk: lower ≤5% of days with water use, watch >5–15%, high >15%.
² Storage needed for your chosen rain-free duration at that month’s use and selected weekdays, starting full. This is not a different tank recommendation each month.
Add monthly reminders to your calendar
Twelve monthly reminders based on your historical water plan. These are seasonal prompts, not predicted dry-spell dates.
Your download is a seasonal planning guide, not a weather forecast for the selected year. Check your actual water level and local forecast before a dry spell.
Your report is ready
Loading the secure email form…
Download PDF ↓ Open PDF in a new tab ↗Your results stay available without an email. Privacy policy
THE THINKING BEHIND THE NUMBERS
Rain is irregular.
Your plan should allow for it.
Two places can receive the same annual rainfall and need very different tanks. We work through each day’s rain, collection, overflow and water use to see what happens between downpours.
What this calculator includes
- 30 years of daily NASA POWER precipitation and temperature estimates, from 1996 to 2025. The preceding year starts the tank simulation from empty.
- Only the roof area connected to your tank. Collection efficiency allows for system losses; unusable tank volume is kept separate.
- Rain enters the tank first, excess overflows, then daily demand is drawn. Storage carries across months and years.
- The smallest tested tank that meets both your historical fully supplied days target and your chosen dry spell at peak daily use.
Data limits & assumptions
NASA POWER uses a regional MERRA-2 grid of about 0.5° latitude × 0.625° longitude. This smooths local storms, hills and coastal variation; it is not a rain gauge on your property. Results are planning estimates, not a tank-sizing guarantee.
Precipitation on days with average temperature at or below 0°C (32°F) is excluded from collection. Snow storage, melting and frozen gutters are not modelled. Cold and snowy locations need a local assessment.
The 85% collection efficiency and 10% unavailable storage are editable starting assumptions. No explicit first-flush event model, peak gutter flow limit, tank leakage, open-tank evaporation or treatment reject-water model is included. Account for these in efficiency or demand as appropriate.
The daily timestep does not capture intraday storm timing. Dry cover assumes the tank starts full. Historical reliability is not a probability or guarantee for future years, and the 20% drier option is a sensitivity check. Confirm local rainfall, actual consumption and usable tank capacity before purchase.
This calculator estimates water quantity. Suitability for drinking depends on the source, treatment, installation and testing; it does not establish that harvested water is safe to drink.
Sources: NASA POWER daily data · MERRA-2 methodology · GeoNames locations (CC BY 4.0, simplified extract) · Roof runoff guidance
RAINWATER, EXPLAINED
A few useful answers.
How much rainwater can I collect from my roof?
One millimetre of rain on one square metre of roof footprint equals one litre before losses. Multiply rainfall in millimetres by the roof area connected to your tank in square metres and your collection efficiency. At an assumed 85% efficiency, 10 mm of rain on 100 m² of connected roof yields about 850 litres.
What size rainwater tank do I need?
Tank size depends on connected roof area, daily water use and the timing of rainfall. This calculator simulates daily storage and overflow over 30 historical years, then compares tank sizes against your chosen percentage of fully supplied days and dry-spell requirement. A bigger tank cannot create water when annual collection is insufficient.
How long will a rainwater tank last without rain?
Divide usable stored litres by daily water use. A full 5,000-litre tank with 10% unavailable storage provides 4,500 usable litres. At 150 litres a day, that is 30 days without rain. A partly filled tank lasts less time. This is days of water use starting with a full tank, not a prediction of your next refill. If you only visit at weekends, the same water can last longer in calendar days.
Which gutters should I include?
Include only roof sections that drain into gutters and downpipes feeding your tank. Use their horizontal footprint, not the length of guttering or the sloping roof area. For two equal roof slopes, collecting from one side captures roughly half the footprint. Unequal slopes or shared gutters need their areas measured separately.
Can this calculator predict a drought?
No. It shows seasonal patterns and shortfalls in historical daily data, not a weather forecast. Local storms, future droughts, climate change and site conditions can produce different results. Keep a backup supply and check local rainfall records before buying a tank.
What if I cannot collect enough water?
Connect more suitable roof area, reduce the demand assigned to rainwater or plan a backup supply. More storage helps when rainfall arrives in bursts and currently overflows. It cannot make up for a long-term gap between what your roof collects and what you use.
Next: choose your filtration
Use your collection and daily-use results when choosing Rain or the Rain Drinking Water Bundle. A storage tank is separate from the filtration system.
